This utility model relates to a glue filled transformer It includes a winding base with a coil wound on a silicon steel sheet. The primary and secondary coils in the coil are connected to metal pins and output wires, respectively. An insulating material and an outer shell are also wrapped on the outside. The insulating material is made of polyester resin mixed with calcium carbonate and hardener for solidification The outer shell is a one-piece molded body made of polyvinyl chloride material Through the above design, the transformer can be directly integrated with insulation material and outer shell in the mold, forming excellent sealing insulation protection. Moreover, through its special insulation material composition design, the transformer has excellent high voltage resistance, waterproof performance, and heat conduction effect
A glue filled transformer has a winding base, and coils are wound on the silicon steel sheets of the winding base. The primary and secondary coils in the coils are respectively connected to metal pins and output wires, and then coated with an insulation material and an outer shell. The characteristic is that the insulation material is coated on the outer side of the winding base and cured by mixing polyester resin with calcium carbonate and hardener. It is completely filled inside the outer shell made of polyvinyl chloride material to form a solid body. <!– 1 –> <dp n=”c1″/>